# 48, Noothanchery, Madambakkam, Chennai - 600 126, India. Ph: +91 44 22781148 Fax: +91 44 22781362 Email: info@tianode.com | tianode@gmail.com

Steel Processing
Tiaano, India – a fabrication company; design, manufacturing, installing and commissioning of custom-made tantalum and titanium equipments for steel processing plant in Acid Pickling and Acid Regeneration for recovery and reuse of hydrochloric acid.

  Acid (HCL) Heating in pickling bath:
Tantalum Heat Exchanger Coils for HCL heating in Pickling Baths:
Traditionally, steel plants are using PTFE immersion coils and direct steam spargers to heat HCL pickling baths. Due to the continuous maintenance of the coils and spargers, there is a permanent environmental impact. Using the custom designed in-tank TANTALUM immersion coils for the indirect steam heating in pickle bath is the alternative cost effective solution. Tiaano, India use their extensive experience and design the most innovative and efficient immersion coils.

  • TANTALUM Serpentine Immersion Coils.
  • TANTALUM Grid Heat Immersion Coils.
  • TANTALUM U-Shaped Immersion Coils.
Offers...
  • Complete / Superior Corrosion resistance.
  • Better / High heat transfer characteristics than non-metallic elements.
  • Higher steam pressure capabilities than traditional PTFE coils – reduce required surface area.
  • Cost comparative to PTFE coils.
  • Better / High heat transfer characteristics than non-metallic elements.
  • Easily retrofittable into existing equipment footprint.
  • Elimination of HCL acid leakages into steam condensate.
  • No spare parts to keep in inventory.
  • Elimination of down time due to equipment failure.
Tantalum immersion Grid Coils
Tantalum Fasteners
Tantalum Safety Pockets
Tantalum immersion Grid Coils Tantalum Fasteners Tantalum Safety Pockets
Tantalum Shell and Tube Heat Exchangers for HCL heating in Pickling Baths:
Its extensive inert & heat transfer properties, TANTALUM shell & tube heat exchanger is having vital role in hydrochloric acid heating at high turbulence shallow tanks pickle bath. Traditionally Carbon block heat exchangers are getting used, its fragile nature and multi-gasket construction requires continuous maintenance and repair work which results expensive spare parts and downtime.
Alternative to Carbon heat exchangers, Tiaano, Chennai offers a full line of standard and custom-made Tantalum shell & tube heat exchangers for the indirect steam heating in pickle bath operations.

Offers...
  • Complete / Superior Corrosion resistance.
  • Better / High heat transfer characteristics.
  • Cost comparative to Carbon Block Heat Exchangers.
  • Higher steam pressure capabilities than carbon block – reduce required surface area.
  • Seam welded metal design eliminates fragile nature, breakage during handling, Installation & Operation.
  • Easily retrofittable into existing equipment footprint.
  • Elimination of HCL acid leakages into steam condensate.
  • No spare parts to keep in inventory.
  • Elimination of down time due to equipment failure.
Tantalum Shapes
HCL Heating in Pickling bath -Tantalum Bayonet Heater
Tantalum Bayonet Heater - Hydrochloric Acid heating
Tantalum Shapes HCL Heating in Pickling bath -Tantalum Bayonet Heater

Tantalum Bayonet Heater - Hydrochloric Acid heating

  Acid Regeneration:
Titanium Gr.7 (Ti-Pd. alloy) ARP Equipments for recovery and reuse of HCL:
Ti Anode fabricators Pvt. Ltd., India offers Titanium Gr.7 (ti-pd alloy) equipments for Pollution abatement cum Hydrochloric Acid regeneration plants for the recovery and reuse of HCL. They are…

  • Ti-Pd. (Titanium Gr.7) Venturi F5.
  • Ti-Pd. (Titanium Gr.7) Blowers V 31.
  • Ti-Pd. (Titanium Gr.7) Impellers V31.
  • Ti-Pd. (Titanium Gr.7) Fasteners.
  • Ti-Pd. (Titanium Gr.7) Acid Lance P2.
  • Ti-Pd. (Titanium Gr.7) Column Pipes A6.
  • Ti-Pd. (Titanium Gr.7) Diffuser Pipe bends A6.
  • Ti-Pd. (Titanium Gr.7) Sleeved EPDM Bellows for V 31, A-10, A6 etc.
The hydrochloric acid used in the pickling process is thermally treated in the acid regeneration plant for the purpose of recovery and reuse in the pickling process. The plant is divided into the following sections:

  • The rector in which the iron chloride is transformed into iron oxide and gaseous HCl.
  • The venturi, in which the hot gases are cooled down from 850’C to100’C (approx). During this process, the pickling acid is strongly concentrated due to evaporation of water.
  • The separator in which the waste gases coming from the venturi liquid.
  • The absorber in which the hydrochloric acid is recovered by absorption of the gaseous HCl in water.
  • The fan F-V-31 with the fume stake which sucks of the gases developed in the reactor and keeps the entire system below atmospheric pressure. The residual inert gases are led through the fume stake into the atmosphere.
  • The venture F25 with separator B26 in which a final treatment of the waste gas is achieved.
  • The chemical reaction during the pickling process can be illustrated with the following reaction equation: Fe2O3 + 6HCl = 2FeCl3 + 3H2O FeO + 2HCl = FeCl2 + H2O 2FeCl3 + H2 = 2FeCl2 + 2HCl 3 Refer http://www.slideshare.net/steelcosmos/acid-regeneration-plant
Few of our repeated & regular Clients are...
  • M/s. UTTAM GALVA STEELS LTD., INDIA.
  • M/s. JSW ISPAT STEEL LIMITED, INDIA.
  • M/s. LLOYDS STEEL INDUSTRIES LTD., INDIA.
  • M/s. STEEL AUTHORITY OF INDIA LTD., INDIA.
  • M/s. TATA IRON & STEEL CO. LTD., INDIA.
  • M/s. NEWTECH INTERNATIONAL WLL, BAHRAIN
  • M/S. VJIKKS ENGG POWER (M) SDN BHD., MALAYSIA.
Ti. Gr.7 Lancer Assembly
Ti Pd Diffusor A6 elbow
Ti. Gr.7 sleeved EPDM
Ti. Gr.7 Lancer Assembly Ti Pd Diffusor A6 elbow Ti. Gr.7 sleeved EPDM
Ti. Gr.7 Venturi for HCL cooling
HCL fuems blower Casing with Titanium Gr.7
Acid Lance for HCL
Ti-Pd Lancer spares HCL fuems blower Casing with Titanium Gr.7 Acid Lance for HCL

Tantalum Grid Coils for HCL heating
Tantalum Grid Coils for HCL heating

Tantalum coil for indirect heating of hydrochloric acid
Tantalum coil for indirect heating of hydrochloric acid

Tantalum Immersion coil for side wall of Pickling bath
Tantalum Immersion coil for side wall of Pickling bath

ARP-Zirconium Heat Exchanger Coil
ARP-Zirconium Heat Exchanger Coil

Tantalum immersion Heat Exchanger Coils
Tantalum immersion Heat Exchanger Coils



Tantalum Shell & Tube Heat exchanger for HCL Heating in Pickling plant
Tantalum Shell & Tube Heat exchanger for HCL Heating in Pickling plant

HCL-Tantalum Shell & Tube Heat Exchanger Bundle
HCl Tantalum Shell & Tube Heat Exchanger Bundle

Tantalum Bayonet Retubing
Tantalum Bayonet Retubing

Tantalum  heat exchanger Tube sheet
Tantalum heat exchanger Tube sheet







ARP-Ti. Gr.7 Venturi F5
ARP-Ti. Gr.7 Venturi F5

V 31 ARP Blower
V 31 ARP Blower

Hydrochloric Acid Regeneration Blower V31 Impeller
Hydrochloric Acid Regeneration Blower V31 Impeller

Ti-Pd Impeler for HCL regeneration
V 31 ARP Blower

Lancer for Steel Plant ARP
Lancer for Steel Plant ARP

Ti-Pd EPDM  Compensator sleeve for V31 and A10
Ti-Pd EPDM Compensator sleeve for V31 and A10

Steel Plant HCL regeneration Diffusor A6
Steel Plant HCL regeneration Diffusor A6

Titanium  Gr.7 Acid regeneration plant equipments
Titanium Gr.7 Acid regeneration plant equipments

ARP-Ti. Gr.7 Fasteners
ARP-Ti. Gr.7 Fasteners

Home | Profile| Technologies| Products| Application| Certification| Raw Material| Water Car
Selection Guide | CP Anode | PT   Anode| Electrolyzers| Chlorinators| Ti Projects| Route Map| Contacts