Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM GR.2 SEAMLESS TUBE

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium GR.2 Seamless Tube. Titanium Grade 2 Seamless Tube the highest ductility and an excellent resistance from mild to high oxidization.

The Titanium Grade 2 Seamless Pipe is also resistance to seawater, brine and aqua. In applications that require low electrical and themal conductivity , the Titanium Alloy Gr 2 Hollow pipe, which is amongst the four commercially pure grades, is perfectly acceptable. In comparison to aluminum, the Titanium Gr. 2 ERW Pipe is about 60% denser. However, the strength of grade 2 titanium is almost two times that of aluminium.Commercially pure Grade 2 Titanium Pipe can exhibt exceptional resistance to corrosion in highly oxidizing as well as midly reducing service.

 

Titanium Grade 2 Pipe Specification

Size

½” to 6” NB Sch 10s, 40s, & 80s, 160s

Wall Thickness

0.1 - 60 mm

SS Seamless Pipe Length

Single Random Length 5to7 mtr

Double Random Length 10-12 mtr

Seamless SS Pipe Surface Finish

Cold Finish, Bright, Polished, Annealing, Pickling, or as per client requirements

Standard

JIS, AISI, ASME, ASTM, AMS, GB, DIN, EN, GOST

Manufacturing types

Seamless, Welded, ERW, EFW

Manufacturing Shapes

Round, Square, Rectangle, Box Section

Manufacturing Technology

Hot / Cold Formed

Other Grades

SS 446

Inspection, Test Reports

EN 10204 3.1, Mill Test Certificates, PMI Test Reports, Chemical Reports, Mechanical Reports, NABL Approved Lab Reports, Visual Inspection Reports, Destructive and Non Destructive Test Reports, Third Party Inspection

Technique

Cold Rolled Hot Rolled

 

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. You can avail this range of Clamps at a very reasonable price and with customer customization. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

 

Enquiry

For any inquiry in regards to Titanium GR.2 Seamless Tube please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

 

OC 446 - TITANIUM GR. 2 SEAMLESS TUBE

TITANIUM GR.2 TUBE

 

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium GR.2 Tube. Titanium Gr 2 Tube is considered to be the ideal alloy choice for most industrial applications which require properties such as good ductility and corrosion resistance. Titanium Gr 2 Sanitary Tube offers excellent resistance to seawater and marine atmospheric corrosion as well.

The density of titanium tubes is significantly lower than steel, copper, or nickel products. Despite their low density, they are very strong and rigid when compared to other alloy components. Another benefit of utlizing titanium tubing is that titanium alloys are resistant to corrosion. This makes these tubes an appealing option if you need a part to work efficiently in a high corrosive environment. Corrosion is not the only thing that titanium tubes are resistant to. They are also resistant to chemicals. These titanium parts can withstand different chemical compounds while still preforming effectively. Titanium tubes have great heat transfer properties because of its thermal conductivity and resistance. The same can't be said for copper and carbon steel tubes. Their resistance to heat also allows them to work successfully at tempeartures up to 600 degrees or higher.

 

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

 

 

 

OC-269

SAFETY LID

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Safety Lid or Flange. A flange or safety lid is a method of connecting pipes, valves, pumps and other equipment to form a piping system.

 

It helps in easy access for cleaning, inspection and modification.  Flange or safety lids are usually welded or screwed. The joints are made by bolting together two flanges with a gasket between them to provide a seal. We specialize in the supply of Titanium Flanges in Grade 2. As per the customer requirement we will also supply the Titanium Flanges in Grade 1, Grade 5 and Grade 7. The entire Titanium flange or safety lid could be customized as drawing or demands.

 

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

OC-415

SUPPLY OF INJECTOR TUBE FOR CHEMICAL PROCESS

Wide range of Components are offered by Tiaano from highly corrosion-resistant special materials for the distribution of Injector tube which is used for injecting liquid fuel.

The above attached photo is for your reference, which was supplied recently to one of our valuable client. 

EXOTIC METAL TUBES USED FOR HEATER INDUSTRIES TO MAHARASHTRA STATE

EXOTIC METAL FASTENERS USED FOR  HEATER APPLICATION  TO MAHARASHTRA STATE

Wide ranges of tubes are offered by Tiaano from highly corrosion-resistant special materials for the heaters industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Our tubes are used to make the following products likes heaters, heating coil, cooling coils, and shell and tube heat exchangers, thermowell, thermowell sleeves etc.

Given mentioned photographs shows the supplied component to client and for your review.

Tubes are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus.

Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

Email: rotarysupport@tiaano.com webpage: www.tiaano.com

EXOTIC METAL TUBES USED FOR HEATER INDUSTRIES TO MAHARASHTRA STATE

EXOTIC METAL FASTENERS USED FOR  HEATER APPLICATION  TO MAHARASHTRA STATE

Wide ranges of tubes are offered by Tiaano from highly corrosion-resistant special materials for the heaters industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Our tubes are used to make the following products likes heaters, heating coil, cooling coils, and shell and tube heat exchangers, thermowell, thermowell sleeves etc.

Given mentioned photographs shows the supplied component to client and for your review.

 

Tubes are made from Titanium, Tantalum, Nickel, Zirconium, Hastelloy are our main focus.

Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

Email: rotarysupport@tiaano.com webpage: www.tiaano.com

EXOTIC METAL TUBES & TUBE WITH WELDED SPOT USED FOR FRP INDUSTRIES TO CHENNAI

EXOTIC METAL TUBES & TUBE WITH WELDED SPOT USED FOR FRP INDUSTRIES TO CHENNAI

 

Wide range of tubes & tubes with welded spot are offered by Tiaano from highly corrosion-resistant special materials for the Jewellery industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Given mentioned photographs shows the supplied component to client and for your review.

 

 

SUPPLY OF EXOTIC METAL TUBES USED FOR HEATER INDUSTRIES TO MAHARASHTRA STATE

SUPPLY OF EXOTIC METAL FASTENERS USED FOR  HEATER APPLICATION  TO MAHARASHTRA STATE

Wide ranges of tubes are offered by Tiaano from highly corrosion-resistant special materials for the heaters industries, manufactured in-house from traceable metals, are precision made to the usual international standards. Our tubes are used to make the following products likes heaters, heating coil, cooling coils, and shell and tube heat exchangers, thermowell, thermowell sleeves etc.

Given mentioned photographs shows the supplied component to client and for your review.

  

Tubes are made from Titanium, Tantalum, Nickel, Zirconium, Hast alloy are our main focus.

 Please feel free to contact us equipmentsmktg@tiaano.com  /  rotarysupport@tiaano.com  

Will share our credentials (client list, performance certificate, etc.) based on email request.

Ti Anode Fabricators Pvt. Ltd.

No. 48, Noothanchary, Madambakkam,

Chennai - 600 126, I N D I A.

 

Email: rotarysupport@tiaano.com webpage: www.tiaano.com