Titanium Equipment's

Engineering & Electrochemical Equipment's Manufacture

TITANIUM GR.2 COOLING COIL

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium Cooling Coil. Cooling coil is used where steam or thermic fluid is used for large scale plating industrial operation. Tiaano offers electro plating industrial coils in various material of construction which suits for your electro-chemical plating process.

Titanium Gr.2 Cooling and heating coils are offered by Tiaano from highly corrosion-resistant special materials for selective applications, manufactured in-house from traceable metals, are precision made to the usual standards up to ASME. Given mentioned photographs shows TAF' efficiency and experience.

These coils provide an extremely effective means of removing heat from the vessel to control an exothermic reaction or for cooling the reactor at the end of a test. Since heat is transferred through the relatively thin wall of the coil instead of the thick wall of the vessel, cooling rates are generally much faster than heating rates; particularly at temperatures above 80 °C. Water is normally used as the cooling medium although compressed air can be used for modest cooling loads. Cooling coils are offered in three standard configurations:

1.      Single Loop

2.      Serpentine Coils

3.      Spiral Coils

Cooling coils are available in the same choice of materials as the reactor bodies themselves. All cooling coils are removable. Plugs are available to close the openings in the head and in most cases these openings can be converted to alternate inlets/outlets if cooling is not required.

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

OC-318

TANTALUM HEATER

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium & Nickel Strainer.

Tantalum heat exchangers, the state-of-the-art solutions, are mainly used in high-corrosive environments in the chemical and pharmaceutical industries.

 Tantalum is highly corrosion-resistant to:

·         Hydrochloric acid

·          Nitric acid

·          Phosphoric acid

·          Strong organic acids

·          Bromine and theirs mixtures.

Tantalum is competitive to glas-lined equipment. Bayonet heaters or heat exchangers are designed to immerse directly in the process chemicals for the steam heating chemicals at the desired temperature level. They are furnished fully and are easy to install in the process lines. They have high corrosion resistance which makes the most demanding product in high corrosion applications. Moreover, the high thermal conductivity offers efficient heat transfer and is designed for the long life, reliability and requires minimum maintenance.

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. You can avail this range of Clamps at a very reasonable price and with customer customization. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

 

Enquiry

For any inquiry in regards to Tantalum Heater please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC-93

PERFORATED SHEET FOR Titanium & Nickel Strainer

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Titanium & Nickel Strainer.

Perforated sheet of mild steel and carbon steel, where permit the passage of light, air, liquid and sound through its openings. It is very resistant and lightweight to corrosion, has a mill, not a glossy finish. It is also available in a variety of sizes and shapes with punches.

A wide range of metals are used in the perforating metal process, which include steel, aluminum, stainless steel, copper and titanium.

Different Types of Perforation:

1.      Round Hole Perforation

2.      Square Hole Perforation

3.      Slot Hole Perforation, Staggered Row Perforation, Straight Row Perforation.

Our sincere team of professionals and employees are always making an extensive effort to make high range of qualitative products which can be completely satisfy the expectations of our reliable consumers. You can avail this range of Clamps at a very reasonable price and with customer customization. We are proficiency in ethical to the equipment demands in diverse industries including Power, Oil & Gas, and Chemical, Water & Waste Water Treatment, Food, Pharma and others.

 

Enquiry

For any inquiry in regards to Titanium Gas Distributor please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 295 - PERFORATED SHEET

DEPLETED BRINE TANK (D240) – TITANIUM GRADE 2

Ti Anode Fabricators Pvt Ltd has an internationally recognized reputation for the manufacture of the Depleted Brine Tank (Titanium Grade 2). It avoids high corrosion resistance. Widely used by mineral water plant and chemical processing plant, Tiaano ‘S engineers provide expert services in the manufacturing of superior quality Depleted Brine Tanks. They can be custom-designed to suit a range of industry use cases.

Industrial Titanium Applications:

Titanium has found in many industrial applications where corrosion resistance is required. Here are some of the common applications of Titanium in corrosion-resistant service:

  • Chlorine Chemicals
  • Hydrochloric Acid
  • Phosphoric Acid
  • Sea Water
  • Sulfuric Acid
  • Nitric Acid

Titanium Fabrications

Tiaano regularly fabricates the following types of Titanium custom process equipment:

  • Pre-Engineered OEM Designed Custom Parts / Systems made with Titanium
  • Titanium Columns Sections
  • Titanium Reactors
  • Titanium Pressure Vessels
  • Titanium Piping Systems
  • Titanium Pipe
  • Titanium Sparger
  • Titanium Fasteners
  • Titanium Agitator

Final selection of material must be based on actual evaluation of the metal in the corrosive medium under study and is the responsibility of the end user. Temperature and concentration play an important factor in corrosion resistance.

Enquiry

For any inquiry in regards to Depleted Brine Tank (Titanium Grade 2) please contact us on +91 8438164458 or email us on equipmentsmktg@tiaano.com.

OC 368 - DEPLETED BRINE TANK D240

FLANGE FOR CHEMICAL PLANT

Spines are presented by Tiaano from exceptionally erosion safe extraordinary materials for the Government and Private businesses, produced in-house from discernible metals, are accuracy made to the typical worldwide principles.

 A rib is a distended edge, lip or edge, either outer or inner, that increments strength (as the spine of an iron bar, for example, an I-bar or a T-bar); for simple connection/move of contact force with another article (as the rib on the finish of a line, steam chamber, and so on, or on the focal point mount of a camera); or for balancing out and directing the developments of a machine or its parts (as within rib of a rail vehicle or cable car wheel, which hold the wheels back from running out of control). Spines are much of the time connected involving bolts in the example of a bolt circle. The expression "spine" is likewise utilized for a sort of hardware used to shape ribs.

Given referenced photos shows the provided part to client and for your survey.

OC-252

MANUFACTURE OF ELECTROPLATING FASTENERS

Tiaano plan and makes Fasteners by utilizing Inert metals of Titanium, Tantalum, Nickel, Hastelloy, Niobium, Duplex SS and so forth. Titanium Grade 2 Fasteners are knowledgeable in high consumption opposition.

Titanium Fasteners are fundamental, particularly in both flying and aviation. Tiaano fabricates Titanium Fasteners in various grades: Titanium grade 2, Titanium Grade 5, Titanium Grade 7. Titanium Grade 2 Fasteners is the normal clasp and is the most economical.

 Titanium Gr. 2 Fasteners has many credits like low weight proportion, top notch obstruction capacity and high strength. These clasp are utilized in the extensive variety of use and they are used for working on the exhibition and administration life of the application. Titanium Gr.2 has high protection from many decreasing conditions like pitting and cleft erosion.

 

 Email: rotarysupport@tiaano.com webpage: www.tiaano.com

TITANIUM ELECTRICAL HEATER

Wide scopes of cylinders are presented by Tiaano from profoundly erosion safe unique materials for the radiators ventures, produced in-house from recognizable metals, are accuracy made to the typical worldwide guidelines. Our cylinders are utilized to make the accompanying items likes warmers, warming loop, cooling curls, and shell and cylinder heat exchangers, thermowell, thermowell sleeves and so forth. Warmers are produced using 99.9% unadulterated Titanium pipe affirming to ASTM B337 and 338 Gr.1/2, it guarantees no self-erosion.Given referenced photos shows the provided part to client and for your survey.

 

Email: rotarysupport@tiaano.com webpage: www.tiaano.com

HASTELLOY SLEEVES FOR THERMOWELLS

Anode Fabricators Pvt Ltd offer the Thermowell and Sleeve for Sensor protection pocket out of Tantalum, Niobium, Zirconium, Titanium, Titanium Palladium alloy (Titanium Gr.7), Molybdenum, Ceramic, PTFE or Teflon, Nickel and its alloys like Hastelloy B, B2, & C,

Tiaano’s Thermowells and Sleeves are designed to satisfy standards, set up with the aid of BSI, DIN, ASME, ISO 9001 and different authorities; manufactured in-house from traceable exotic & Refractory Metals, precious & non-ferrous metals and Polymer factors. They're all precision made to the best requirements of end in our modern-day nicely prepared system keep.

  To know more details Please feel free to visit our website: - www.tianode.com

TANTALUM SLEEVES FOR THERMOWELLS

Tiaano’s Thermowells and Sleeves are designed to meet standards, established by BSI, DIN, ASME, ISO 9001 and other authorities; manufactured in-house from traceable Exotic & Refractory Metals, Precious & non-ferrous metals and Polymer elements. They are all precision made to the highest standards of finish in our modern well equipped machine shop.

Potentially the most safe technique for protecting the thermowells from artificially intense fluids is to give a bar-stock flanged thermowell produced using customary tempered steel with free covering as a Tantalum sleeve in general wetted fragment. This will invigorate from tempered steel disintegration hindrance from the covering. 

Ti Thermowell

HASTELLOY SLEEVES FOR THERMOWELLS

Tiaano’s Thermowells and Sleeves are designed to satisfy standards, set up with the aid of BSI, DIN, ASME, ISO 9001 and different authorities; manufactured in-house from traceable exotic & Refractory Metals, precious & non-ferrous metals and Polymer factors. They're all precision made to the best requirements of end in our modern-day nicely prepared system keep.

 The function of the impeller sleeves is to protect the shaft from wear and coming in contact with the pumping fluid. Pump shafts are usually protected from erosion, corrosion, and wear at seal chambers, leakage joints, internal bearings, and in the waterways by renewable sleeves. Pump sleeves help direct water flow to properly cool motors. Submersible pump motors require water flow over them to dissipate heat.

 To know more details Please feel free to visit our website: - www.tianode.com